The parallel shaft reducer is the F series reducer among the four series of reducers with hard tooth surfaces: R, FS, and K. The modular design principle of unit structure is adopted, which greatly reduces the types of parts and inventory, and also greatly shortens the delivery cycle. The reinforced high-rigidity cast iron box and gears are made of alloy steel. The surface is carburized and quenched and hardened, and the gears are finely machined. The transmission is smooth, the noise is low, the load-bearing capacity is large, the temperature rise is low, and the service life is long.
The parallel shaft reducer consists of two or three-stage helical gears, which are related to the reduction ratio and are installed in the same box. A total of 11 specifications of parallel shaft helical gear reducers, with torque ranging from 3 to 22500NM. The maximum output power of the motor is 200KW.
The transmission ratio of the parallel shaft reducer ranges from i=3.77 to i=31434 with fine gradation. Particularly low output speeds can be achieved (multi-stage reducer with additional helical gear input stage).
